麻豆区
Customer Review
- Reviewed in Canada on January 25, 2023Got this to mount a 34鈥 monitor on the wall by my desk. Its all-metal build is impressively solid, and the spring & extension mechanism seems to work smoothly with no squeaky noises. It was also very easy to mount to the stud on my wall, as all the parts are provided, except for your drill and/or impact screw driver.
One important thing to note is that the wall-mounting plate is NOT centered aligned with the VESA mounting plate. So, if you want to center your monitor in the fully-closed position, make sure you offset the wall-mounting plate accordingly.
The product is design so that you can first mount the VESA plate by itself onto the back of the monitor first. And then after you've mounted the arm onto the wall, you can just lift the monitor and slot the VESA plate into the clip at the end of the arm.
To make it easier to raise the monitor (to my chest height) and align the installed VESA plate with the clip at the tip of the arm, I first reduce the spring tension so that it's very easy to lower the arm to my chest height. Afterwards, I re-adjust the spring tension to accommodate the weight of the monitor to hold its position when re-positioning it.
With the 34鈥 monitor mounted, the arm moves fairly smoothly. It was also easy to adjust the gas spring tension to compensate for the weight of the monitor. However, it was very problematic with the tilting mechanism 鈥 it鈥檚 both poorly designed and poorly made. I had to tighten the Allen screw with significant force to get the tilt lock tight enough to hold the monitor鈥檚 tilt position (hint: use 2 Allen keys, on one side to hold the screw, and one on the other side to tighten). But then, with the tilt screw so tight, it became difficult to adjust the tilt afterwards. After re-adjusting the tilt about a dozen times, the Allen screw became a bit loose so that the monitor's tilt angle sagged easily. I just have to keep in mind not to adjust the tilt too often.
