| Manufacturer | Franklin Electric Canada, Inc. |
|---|---|
| Place of Business | FORT WAYNE, IN, 46809 US |
| Part Number | 97102001 |
| Product Dimensions | 55.5 x 29.01 x 25.91 cm; 28.58 kg |
| Item model number | 97102001 |
| Is discontinued by manufacturer | No |
| Size | 2 Hp |
| Colour | Red |
| Style | 2 HP, Thermoplastic Impeller, 230 Volt only |
| Material | Cast Iron |
| Pattern | Sprinkler Pump |
| Power Source | Corded Electric |
| Voltage | 230 Volts |
| Wattage | 7332 watts |
| Horsepower | 2 |
| Item Package Quantity | 1 |
| Flow Rate | 76 Gallons Per Minute |
| Measurement System | Imperial |
| Usage | Amateur, Professional |
| Included Components | Installation manual, Pump with thermoplastic impeller |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | 2 year manufacturer |
| Item Weight | 28.6 kg |
| Country of origin | China |
Videos for similar products
From the manufacturer
Product Selection Tips:
The easiest way to select the proper pump for the job is to determine how many sprinkler heads and what size pipe is used. If 1/2" pipe is used, the formula is GPH at 30 PSI divided by 3. If 3/4" pipe is used, the formula is GPH at 30 PSI divided by 6. We have done the calculations for you and the information can be found in both the technical specifications and the pump comparison chart found on this page.
Installation Tips:
This pump is rated 4 out of 5 stars in level of difficulty (5 being most difficult). Electrical wiring is required along with precise measurements for cutting the piping. This pump is designed to work with a pump start relay and a timer (not included.) We strongly recommend hiring a sprinkler pump installer or contractor with sprinkler installation experience for this installation.
- This pump is DUAL VOLTAGE which means it will work with both 115 Volt and 230 Volt power sources. The voltage selection indicator on the pump MUST MATCH the power source. The pump comes PRE-SET for 230 Volt operation. To use the pump for 115 Volt installation, the voltage indicator on the pump must be changed to 115 Volts. Instructions for changing the voltage are in the Owner's Manual. A small motor cover is located on the back end of the pump's motor and must be removed with a screwdriver. For the 1 HP model, once the cover is removed, insert a flat head screwdriver in the voltage change indicator and rotated counter clockwise so it read 115 and replace the motor cover. (See Owner's Manual for illustration.)
- USE PTFE tape on all pipe thread and ensure the the suction and discharge lines are completely AIRTIGHT otherwise the pump will lose prime and will be extremely noisy (called cavitation).
- PRIME the pump! Remove the priming port plug at the top of the unit. Open the discharge valves on the discharge side of the pump. Fill the pump with water through the priming port. Allow trapped air to escape for a few minutes, then add more water until the pump and line is full. Replace the priming port plug and tighten with a wrench.
- A CHECK VALVE (not included) should be installed on the discharge line to keep the pump primed and a STRAINER should be used on the intake line to keep debris from entering the pump.
- Additional instructions, safety tips, and troubleshooting tips are found in the Owner's Manual.
Red Lion RL-SPRK100, 97101001
|
Red Lion RL-SPRK150, 97101501
|
Red Lion RL-SPRK150-BR, 9710502
|
Red Lion RL-SPRK200, 97102001
|
Red Lion RL-SPRK-200-BR, 97102002
|
|
|---|---|---|---|---|---|
| Customer Reviews |
76
|
525
|
32
|
311
|
53
|
| Horsepower | 1.0 hp | 1.5 hp | 1.5 hp | 2.0 hp | 2.0 hp |
| Impeller material | Thermoplastic | Thermoplastic | Brass | Thermoplastic | Brass |
| Voltage | 115/230 Volts | 115/230 Volts | 115/230 Volts | 230 Volts | 230 Volts |
| Amperage | 14 A @ 115 V; 7A @ 230 V | 18.6 A @ 115 V; 9.3A @ 230 V | 18.6 A @ 115 V; 9.3 A @ 230 V | 10.9 A @ 230 V | 10.9 A @ 230 V |
| Intake - 2" FNPT | ✓ | ✓ | ✓ | ✓ | ✓ |
| Discharge - 1.5" FNPT | ✓ | ✓ | ✓ | ✓ | ✓ |
| Flow rate at 30 psi (5' lift) | 38 gpm | 44 gpm | 44 gpm | 65 gpm | 64 gpm |
| Maximum pressure | 45 psi | 44 psi | 41 psi | 49 psi | 47 psi |
| Max sprinklers (1/2" fittings) | 12 sprinkler heads per zone | 14 sprinkler heads per zone | 14 sprinkler heads per zone | 21 sprinkler heads per zone | 21 sprinkler heads per zone |
| Max sprinklers (3/4" fittings) | 6 sprinkler heads per zone | 7 sprinkler heads per zone | 7 sprinkler heads per zone | 10 sprinkler heads per zone | 10 sprinkler heads per zone |
Product information
Additional Information
| ASIN | B07HFDP7H3 |
|---|---|
| Customer Reviews |
4.1 out of 5 stars |
| 鶹 Rank |
|
| Date First Available | July 3 2018 |
Feedback
From the brand
-
To our valued Canadian customers:
Canada and the Red Lion brand are closely connected. The Red Lion brand was created by Canadians in Winnipeg, Manitoba, specifically for homeowners. The brand is registered to Franklin Electric Canada, Inc., and all of our products supplied to 鶹.ca are fulfilled by Canadians through our Canadian distribution center located in Bolton, Ontario. We appreciate your continued support.
-
About Us
Backed by the heritage of a global leader in the development and manufacturing of systems and components that move water, the Red Lion brand remains at the forefront of product innovation by listening to its customers, adapting to the market, and continuing to invest in research and development. This innovative product portfolio is supported by unparalleled service to provide you with current solutions to your water pumping challenges.
-
Shop Shallow Well Jet Pumps
-
Shop Convertible Jet Pumps
-
Shop Deep Well Products
-
Shop Lawn & Irrigation Pumps
-
Shop Utility Pumps
-
Shop Sump Pumps
-
Shop Sewage and Effluent Pumps
-
Brands in this category on 鶹
Sponsored
Brand in this category on 鶹
Sponsored
