2 Pack Non-Contact Voltage Detector, Voltage Tester Electrical, AC 12V/48V/70V-1000V, Wire Tester with Buzzer Alarm and Flashlight, Wire Breakpoint Finder, Orange & Red
To see product details, add this item to your cart. You can always remove it later.
Purchase options and add-ons
Brand
Xkwespe
Power source
Battery Powered
Min. Operating voltage
12 Volts (AC)
Maximum operating voltage
1000 Volts (AC)
UPC
788046397840
Manufacturer
Xkwespe
About this item
【Non-contact Voltage Tester】 Ranging 12-1000V AC, You can easily distinguish the live and null wire through different level of alarm sound and LED indicator.
【Safe and Convenient】The voltage pen tester detectes voltage in a non-contact way, which provides you with the easiest and safest way to check the voltage in a wire, outlet, circuit breakers, lighting fixtures or switch.
3 Buzzer Modes When voltage is detected, the signal indicator LED lights in the tester pen will shine. Low sensitivity mode - buzz 1 time. Press "S" once to enter medium sensitivity mode - buzz 2 times. And press "S" again to enter high sensitivity mode - buzz 3 times.
【Versatile】Built with detection light and tail flashlight, the electrical tester also work as an emergency flashlight that can illuminate in a dark working place. The tail flashlight can only be turned on when the tester is off
【Compact Size】The pocket-sized circuit tester pen comes with a convenient pen hook that makes it easy to carry in your shirt pocket.
This item: 2 Pack Non-Contact Voltage Detector, Voltage Tester Electrical, AC 12V/48V/70V-1000V, Wire Tester with Buzzer Alarm and Flashlight, Wire Breakpoint Finder, Orange & Red
2 Pack Non-Contact Voltage Detector Pocket-sized Voltage Tester
Indicator LED Lights
The voltage detector will emit different levels of alarm sounds and signal indicator lights to indicate the presence and strength of voltage.
Non-Contact
The safest way to check for electrical leakage. Stay safe and improve your workflow by quickly checking electrical outlets, wires, and fixtures
Automatic Off
The voltage detector will automatically power off after 3 minutes of inactivity to conserve battery life.
3 Buzzer Modes
Low sensitivity mode - buzz 1 time. Press "S" once to enter medium sensitivity mode - buzz 2 times. And press "S" again to enter high sensitivity mode - buzz 3 times.
Battery Installation
Press the small orange square and push up the battery cover, install the batteries.
Easy to Carry
Pencil hook design is convenient for you to carry around without taking much space.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on 鶹. It also analyzes reviews to verify trustworthiness.
Money for your value is good as it comes with 2 detectors. At 1st I wondered if there was anything different about them, but it's just the color. As a benefit, working and charged batteries are also included. The detector pen has a light that you can use in dark areas (think of basement and fuze panel) and an LED scale that accompanies sound as you get closer to the voltage source. I tried it on outlets as well as drywall and it detected where the electrical wires to the outlet were. It also detected that my outlets were live, which they were. There are no instructions in the packet, and it was only after checking the listing that I figured out the S button was for sensitivity and there were 3 levels. You'll have to do the same as I did :-). Materials are good, it is accurate, the light works well and it comes in 2 colors, what else is there to want :-) ? I would recommend it.
鶹 Vine Customer Review of Free Product( What's this? )
Money for your value is good as it comes with 2 detectors. At 1st I wondered if there was anything different about them, but it's just the color. As a benefit, working and charged batteries are also included. The detector pen has a light that you can use in dark areas (think of basement and fuze panel) and an LED scale that accompanies sound as you get closer to the voltage source. I tried it on outlets as well as drywall and it detected where the electrical wires to the outlet were. It also detected that my outlets were live, which they were. There are no instructions in the packet, and it was only after checking the listing that I figured out the S button was for sensitivity and there were 3 levels. You'll have to do the same as I did :-). Materials are good, it is accurate, the light works well and it comes in 2 colors, what else is there to want :-) ? I would recommend it.
Money for your value is good as it comes with 2 detectors. At 1st I wondered if there was anything different about them, but it's just the color. As a benefit, working and charged batteries are also included. The detector pen has a light that you can use in dark areas (think of basement and fuze panel) and an LED scale that accompanies sound as you get closer to the voltage source. I tried it on outlets as well as drywall and it detected where the electrical wires to the outlet were. It also detected that my outlets were live, which they were. There are no instructions in the packet, and it was only after checking the listing that I figured out the S button was for sensitivity and there were 3 levels. You'll have to do the same as I did :-). Materials are good, it is accurate, the light works well and it comes in 2 colors, what else is there to want :-) ? I would recommend it.
as others mentioned, the color of pen is the only difference. the light option on the butt end of the pen is a nice feature. there is also a light on the end to sence 'AC' appears to have 3 modes of sensitivity, but the highest mode seems to beep no mater what... holding it around the room etc. how long they last, is still to be determined.
鶹 Vine Customer Review of Free Product( What's this? )
This is a pair of voltage detectors, just in a different color, batteries are provided. There aren't really any instructions on this, you have to watch the video from the ad. So there is a light on either end of this device, which can illuminate the area that you're working on if you need it. There are 3 modes of sensitivity, and depending on the voltage you're working with, you pick the right one, because if you make it too sensitive when you don't need to, it will give quite sporadic results. It beeps when there is voltage and continuity detected, and it stops when there isn't, thus helping you find the problem wire and location of break. It has worked in the live wires I tested, and with a higher sensitivity, it will start beeping even at a slight distance.