Safety and Compliance Information for Echo Dot (5th Generation) with clock
Use Responsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
AVOID PROLONGED LISTENING AT HIGH VOLUME. Prolonged listening of the player at high volume can damage the ear of the user. To prevent possible hearing damage, users should not listen at high volume levels for long periods.
Warning: "CHOKING HAZARD - SMALL PARTS. Small parts contained in your device and its accessories may present a choking hazard to small children."
Maintaining Your Echo Dot (5th Generation) with clock
Do not expose your Echo (5th Generation) with Clock (your "Device") Device or adapter to liquids. Do not use your Device near sinks or other wet locations. Take care not to spill any food or liquid on your Device and do not put any object filled with a liquid, such as a vase, on or near your Device. If your Device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the Device and adapter to dry completely before plugging them in again. Do not attempt to dry your Device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the Device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the Device to power your Device. To avoid risk of electric shock, do not touch your Device or any wires connected to your Device during a lightning storm.
Install your power adapter into an easily accessible socket-outlet located near the equipment that will be plugged into, or powered by, the adapter.
Only handle your Device with clean hands. Clean the Device by unplugging it and using a soft cloth that is slightly damp with water and a touch of rubbing alcohol; be careful not to wipe it with anything abrasive or to use any harsh chemicals. After cleaning, wait for the Device to dry completely before plugging it in again.
Don't expose your Device to steam, extreme heat or cold. For example, do not install your Device near any heat sources such as space heaters, heater vents, radiators, stoves, or other things that produce heat. Use your Device in a location where temperatures remain within the Device's operating temperature range set forth in this guide. Your Device may get warm during normal use. To reduce the effect of the warming, place your Device on a heat resistant surface.
Use of third party accessories may impact your Device's performance. In limited circumstances, use of third party accessories may void your Device's limited warranty. Read all safety instructions for any accessories before using with your Device.
Your Device does not have an on/off button. If you wish to stop power from flowing into your device, unplug the power adapter. Only use the included power adapter with your Device. Do not force the power adapter into a power outlet. If the power adapter or cable appears damaged, discontinue use immediately. Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat and may result in a fire.
Certain wooden surfaces may diffuse oils after prolonged contact with an electronic device with a silicon base like your Device. This may result in marks on the wooden surface. Remove your Device from the wooden surface to allow the marks to disappear. If marks persist, clean and oil the wooden surface based on the manufacturer's instructions.
Servicing Your Device
If your Device needs service, please contact 鶹 Customer Support. Contact details can be found at .
Faulty service may void the warranty.
Safety Considerations
- Install your power adapter into an easily accessible socket-outlet located near the equipment that will be plugged into, or powered by, the adapter.
- Do not expose adapter or cable to liquids.
- If the Device, adapter or cable appears damaged, discontinue use immediately.
- Use only accessories supplied with the Device to power your Device.
- Power adapter designed only for use with your Device.
- To avoid risk of electric shock, do not touch your Device or any wires connected to your Device during a lightning storm.
- Small parts contained in your Device and its accessories may present a choking hazard to small children.
- For safety, compliance, and other information regarding any smart home device connected to your Device, please consult the user manual and other information provided by the manufacturer of such smart home device.
Using Your Device Around Other Electronic Devices
Your device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
FOR CANADIAN CUSTOMERS
Innovation, Science and Economic Development Canada (ISED) Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy
Your device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.
This device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
CAN ICES-3 (B)/NMB-3(B)
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation.
This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Recycling Your Device Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to .
Additional Safety and Compliance Information
Your device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
For safety, compliance and other information regarding any speaker connected to your Echo Dot (5th Generation) with clock, please consult the user manual and other information provided by the manufacturer.
Additional safety, compliance, recycling and other important information regarding your device can be found in the Alexa app under Help & Feedback > Legal & Compliance.
Product Specifications
- Model Number: C4E8S3
- Ports: DC Input Port
- Power: AC power adapter Output: 12.0 VDC, 1.25 A, 15.0 W. Input: 100-240 Vac, 50/60 Hz, 0.5 A.
- Connectivity : Dual Band Wi-Fi (2.4 & 5 GHz); 802.11a/b/g/n/ac; Bluetooth/Bluetooth Low Energy
- Operating temperature Range: 32°F to 95°F (0°C to 35°C).
- Storage temperature Range: 14°F to 113°F (-10°C to 45°C).
LEGAL TERMS
Please read the terms found at .
Additional Information
You can find the Terms of Use, Limited Warranty, instructions for using the Device, customer service contact information, and other applicable terms and Device information at . See the Legal Notices in this product or in the App for other applicable notices.
