Easy to use, I had a deep chip on right front of stove, about a 1/2 inch long. It was so noticeable and I hated it. Per the directions I applied quite a few thin coats, allowing lots of drying time between coats. I also found gentle dabbing rather than brush strokes worked well. Very impressed with the results. I do have a slight ridge at bottom - wondering if I could safely file off with a fine nail emery board or super fine sand paper. Has anyone tried something like this? Don鈥檛 want to mess with it because it looks so good compared to start. Wish I鈥檇 taken pics before I started - difference is remarkable.
Easy to use, I had a deep chip on right front of stove, about a 1/2 inch long. It was so noticeable and I hated it. Per the directions I applied quite a few thin coats, allowing lots of drying time between coats. I also found gentle dabbing rather than brush strokes worked well. Very impressed with the results. I do have a slight ridge at bottom - wondering if I could safely file off with a fine nail emery board or super fine sand paper. Has anyone tried something like this? Don鈥檛 want to mess with it because it looks so good compared to start. Wish I鈥檇 taken pics before I started - difference is remarkable.