�鶹��

About this item

• Dual-Function Design：Neoteck moisture meter combines 2 essential tools in one device. Its pinless mode allows for quick, non-destructive surface scans, while the pin-type mode provides deep, percentage-based readings for materials like wood. This versatile two-in-one tool is ideal for home inspections and woodworking, eliminating the need for separate meters and saving time
• Six Material Modes: Multifunctional moisture meter includes 6 professional modes: soft/hard wood,drywall,plaster,screed and concrete. Wood can be tested using either pinless (inductive) or pin-type methods, while the remaining 4 building materials are measured via non-destructive inductive scanning. This versatile design functions as both a precise wood moisture meter and a reliable moisture detector for drywall, concrete, and other common materials
• Precise Technical Specifications:Neoteck pinless moisture meter provides reliable, non-invasive scanning with a consistent depth of 19mm over a 50x50mm minimum area. It offers dedicated measurement ranges for six materials—Soft Wood (5.0-55.0%), Hard Wood (3.0-34.0%), Drywall (0.1-31.0%), Plaster (0.1-26.0%), Screed (0.1-6.0%), and Concrete (0.1-18.0%). Both pinless and pin-type modes deliver ±2% accuracy on wood, making this a precise tool for professional woodworking and building inspections, with full specifications clearly provided
• Intelligent Custom Alerts with Visual & Audio:Moisture detector features a customizable alarm system that allows you to set thresholds for Dry, Moist, and Wet conditions. It provides instant visual feedback via a tri-color LED (Green for Dry, Blue for Moist, Red for Wet), a live bar graph, and a numerical display. Audible alerts include a beep for Moist conditions and rapid beeping for Wet levels, with a mute option available. This enables quick, hands-free scanning and immediate problem identification to help prevent water damage
• Rechargeable with Utility Function: Moisture reader powered by a 1200mAh battery with USB-C charging for continuous operation. Auto power-off conserves energy after 30 minutes of inactivity. The HOLD function locks readings in vibrating environments, while the backlit LCD ensures clear visibility in dark spaces like attics or crawlspaces
• NOTE (Pinless Measurement): a.Keep metal objects (nails, screws, pipes) at least 2 inches away from the sensor to avoid false high readings.b.Hold the device by its narrow base to prevent hand moisture from interfering.c.Do not measure standing water, as the tool detects material dielectric constant, not direct water content.d.Be aware that moisture or metal below the surface (up to 0.75 inches deep) can affect readings.e.For best accuracy, ensure material thickness is between 20–40mm; if thinner than 19mm, elevate or stack the material.f. Note that conductive substances in materials may indicate higher moisture levels
• NOTE (Pin Probe Measurement): a.Insert pins fully into wood/building materials at consistent depth. b. Measure wood across the grain (not parallel to rings) to avoid skewed readings from uneven insertion. c. Keep ≥5cm from edges to prevent false moisture detection. d. Accuracy may decrease on wood below -5°C