![ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clea](https://images-na.ssl-images-amazon.com/images/I/719j3oukuaL._AC_UL200_SR200,200_.jpg)
![ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large](https://images-na.ssl-images-amazon.com/images/I/71EtNUkIWZL._AC_UL200_SR200,200_.jpg)
![bestarc Plasma Cutter, [Pilot Arc][Large LED Display][Air Sensor]50A bestarc Plasma Cutter Machine 110/220V Dual Voltage, 1/2](https://images-na.ssl-images-amazon.com/images/I/710juq3pEeL._AC_UL200_SR200,200_.jpg)
![bestarc Plasma Cutter, [Pilot Arc][Large LED Display] 55A bestarc Plasma Cutter Machine 110/220V Dual Voltage, 5/8 Inch Clean Cut 3/4 Inch Max Cut, Post Flow Mesh Cut, 2T/4T for Beginners DIY](https://m.media-amazon.com/images/I/41Ngxja24LL._AC_.jpg)
![ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT](https://m.media-amazon.com/images/I/51FAl0HNQhL._AC_.jpg)
Love it
I cannot compare to another brand or model because it is the only one i had but i should have bought this tool a decade ago!
I'm not able to make a perfect cut that don't need deburring yet, but it is a lot easier than using a zip cut disck!
Get a good smokey glass to avoid eye burn if you want to look at the very bright cut while using it. Not like welding, but not so far from this brightness. I learned it the wrong way...
Also get a tip kit to have spares and to get a cutting support to save it at some extend.
I modified a ruler with strong magnet to make a guide for straighter cuts. You can probably buy one and i would suggest it with this tool.
I 'm able to run it full power with just a 30a 240v outlet but according to specs, i should use a 50A outlet....But when i look at the tool power cord with 12awg, i don't think it could trip a 30a breaker without warming up the power cord.
I did look at a testing video and they confirmed this model was giving the current expected to cut.
Obviously, the provided 120v adapter won't run the tool at high amps. The manual state tool limit under 120v without accounting for the usual 120v 15a breaker from the breaker panel. I didn't try it and i won't suggest it.
The starting system work well. it need to chew some metal to keep going. you have to start at the edge of your metal piece and find the correct pace. I played with amps and pressure but the main point seem to be the speed you take to move the tip that makes the more difference on the cut result. (More or less deburing)
My only complaint is the plastic air regulator on the back limited at 90 psi. Most garage run at higher pressure so i have to use a second better grade regulator to drop it first from 150 to 90....There is a safety valve that pop if you try too much pressure before the plastic body broke but i have no clue if it could last long between 90 and the safety pressure and i don't really want to know...
| Manufacturer | YESWELDER |
|---|---|
| Place of Business | YESWELDER |
| Parcel Dimensions | 45.4 x 34.8 x 27.4 cm; 9.64 kg |
| Batteries Required? | No |
| Item Weight | 9.64 kg |
