WOPOLTOP 20,000 BTU Swimming Pool Heat Pump - for Above and In Ground Pools and Spas, 5.6kW Electric Swimming Pool Heater Pump with Titanium Heat Exchanger, 110V~120V/ 60Hz, Up to 6000 Gallons : 鶹.ca: Patio, Lawn & Garden
WOPOLTOP 20,000 BTU Swimming Pool Heat Pump - for Above and In Ground Pools and Spas, 5.6kW Electric Swimming Pool Heater Pump with Titanium Heat Exchanger, 110V~120V/ 60Hz, Up to 6000 Gallons
To see product details, add this item to your cart. You can always remove it later.
【High Efficiency】The WOPOLTOP Pool heat pump is equipped with a high-power compressor with a maximum output of 20000 BTU/ hour. Pure titanium heat exchangers are resistant to corrosion of pool water and can therefore be used in saltwater pools.
【Intelligent System】Temperature control system can keep the pool temperature at a consistent level. Easy to set up digital panels provide quick access to unit controls. Child locks and advanced protection systems make use of the pool more convenient.
【Stable and Safe】This heat pump model is designed for 120V/60hz, easy to operate standard 3-pin, 120V plug, can be used for US electric, direct plug operation. Equipped with fuses, varistors and strong electromagnetic compatibility protection.
【Easy to Install】Equipped with 2 x 1.96 "(50 mm) adapters for quick and easy connection, they can help you operate the heat pump simply and easily in less than 30 minutes. This product is recommended for use with 600-800 gallon flow pumps.
【Good Choice 】Designed for heating above/underground swimming pools and small indoor swimming pools. The steel chassis is designed to withstand year after year. The waterproof profile is designed to accommodate a variety of placement options.
Tips: If the pressure gauge display is not normal, that is, there may be refrigerant leakage, please tell us, we will solve for you
With an output of 20,000 BTU, WOPOLTOP pool heat pump is specially designed for above-ground pools up to 6000 gallons or in-ground pools up to 4000 gallons, hot tubs, spas, etc. The operation only requires very limited electric input, hence its high efficiency and heat conversion rate can reach a score of COP 5.0.
[Specification]
Compressor:Rotary type with R410Arefrigerant, GMCC or the similar class brand.
մDZٲ:110/220-240մ60/1ʱ
Rated Current:4.8A
Max. Current:7A
Advised pool volume (covered):10-16m³
Advised water flow:600~850gal/h
Water Pressure Drop:12kPa
Heat exchanger:Sprial Titanium Tube in PVC shell
Water connection:50mm/1.97"
Air side heat exchanging type:Side discharge
Fan Speed:850RPM
Fan motor power input:70W
Noise level (10m):42dBA
Noise level (1m):49dBA
Net Weight:38kg/84lb
[Settings]
Air 78.8℉, Humidity 80%, Water Heated to 78.8℉
Heating Capacity:5.56 kW
Power consumption:1.09 kW
C.O.P.:5.0 W/W
Air 59℉ Humidity 70%, Water Heated to 78.8℉
Heating capacity:3.67 kW
Power consumption:0.9 kW
C.O.P.:4.1 W/W
[Packages]
Pool Heat Pump * 1
Water Connector (50 mm) * 2
Instruction of Operation * 1
[Please Notice]
1. Keep the pump upright for more than 24 hours before using it to wait for the contents to settle, because it is maybe upside down or on the side during shipping.
2. Each pump is tested with water and electricity at manufacturing before the sale, so there will be little water, which doesn't represent it is used.
3. You need to confirm your water pump, and the advised water flow of our mini heat pump is 600 - 850 gal/h.
If the water flow is too fast, there is not enough time for the pump to heat water, causing the outer part to freeze up.
If the water flow is not enough, water is not circulating up, which also results in E8 Code and the pump doesn’t work.
4. When the pump works properly, there is a temperature difference between the fan outlet and the back air inlet, and also a temperature difference between the water inlet and the outlet.
5. If you want your pool's temperature to rise quickly, having a solar cover covering the pool at night is helpful.
6. It is helpful to take some photos or videos when you have any usage issues.
Product details
Product Dimensions
:
78.74 x 33.02 x 53.34 cm; 31.75 kg
WOPOLTOP 20,000 BTU Swimming Pool Heat Pump - for Above and In Ground Pools and Spas, 5.6kW Electric Swimming Pool Heater Pump with Titanium Heat Exchanger, 110V~120V/ 60Hz, Up to 6000 Gallons
Share:
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on 鶹. It also analyzes reviews to verify trustworthiness.
For me, it was a good investment for the summer. It does not come with a hose, and also has to prepare a small flow rate of water pump to use, of course, these are not a problem. Even if I am not a professional, the installation can be completed very well, it needs to be noted that the connection should be fixed in place, otherwise it will leak. It's a bit heavy though, and needs to be dragged to my yard somehow. Everything went smoothly after getting started and operation was simple, it automatically heated and turned off to maintain the temperature I needed, and it was really great for my 5000gal pool!
Was really excited about this pool heater. However when it was turned on we only got clicking sounds, so we couldn’t even trouble shoot. It should be noted we sent it back and 鶹 was fabulous! The delivery company was not! We told them it was heavy to use a hand truck. The driver “dropped the unit twice” which caused my packing to come undone which was screwed into the wood packing base. If this is how pick up goes, it may have been more damaged before delivery! Very sad!