How to use the tracker
Examine area:
①Install the antenna and turn on the tracker.
② Press the "SEN+" button to adjust the sensitivity to the maximum value (7), you will hear the speaker noise (you can also adjust or turn off the volume by pressing the "Sound" button) and set the "far" mode.
③Hold the receiver and walk around the area where you want to estimate the position, slowly sweeping the receiver back and forth.
④ When the right direction of the transmitter is detected, the signal will become stronger, otherwise it will weaken.
⑤ When the signal display is full, slowly reduce the sensitivity by pressing the "SEN-" button.
⑥ Hold the receiver perpendicular to the floor and move slowly closer to the transmitter. When the sensitivity is set to the minimum value (1) and the signal display is still full, set the mode to "close".
Detector searches for specific locations:
① Use the above steps to find the approximate position of the transmitter and change the mode to "close".
② Press the "SEN+" button to adjust the sensitivity to the maximum value (7), hold the receiver and slowly sweep the receiver back and forth to the approximate position of the transmitter. The closer you get to the exact position of the transmitter, the stronger the signal will be, otherwise it will become weaker.
③ When the signal is displayed as the strongest, slowly lower the sensitivity by pressing the "SEN-" button. When the sensitivity is set to the minimum value (1) and the signal display becomes stronger, you can determine that this position is the specific position of the transmitter.
Technical Parameters
Screen size: 3.5 inches.
Display operation: buttons
Receiver frequency: 512Hz
Power consumption: <3W
Distance: about 5m
Battery: Built-in 3.7V 3000mAh lithium battery
Charger: 5V0.5A
Charging time: about 6 hours
Battery indicator: 5 bar
Battery working time: about 10 hours
Signal strength: 6 gears
Adjustable Sensitivity: Support
Speaker: Stand
Detection mode: far/close
Packing list
1 x Plastic Box
1 x Locator
1 x user manual (English language not guaranteed).
1 x Brasier.
1 x Charger
1 x USB-C Data Cable
1 x Earphones.