PRO 2 in 1 SLIDE HAMMER: Long T dent remover tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect effect and high efficiency. Short T tool is a strenuous pulling mode which repairs the dents of all sizes by your own strength, the effect is simple and quick. You will have different DIY auto body dent removal experiences.
HIGH QUALITY MATERIAL: T bar slide hammer dent puller made from tempered high carbon stainless steels and standard stainless steel. The 16 pure black glue tabs are all made of high-reliability plastic and they are thickened and widened. So this paintless dent kit will very durable and no worried it break.
EASY to OPERATION: Most of the dent remover can be finished in half hour, it can save your much money and time, in addition, the auto body dent repair set can be used unlimited time. The paintless dent repair kit is great for any person to operate, even the girl can easily repair.
WIDELY USE: This sliver slide hammer suit for large sizes or medium sizes dent. The metal bridge work great for medium dent. The tools great to work for the metal surface of truck, automobile, refrigerator, motorcycle body, washing machine etc.(But not suitable for corners or creases).
SAFE& : GREAT SERVICE: Dent pullers tabs won't damage at the vehicle original paint. (100W) glue gun built-in fuse and makes it safer. All material without chemicals or toxic material. If any quality-related issues with the item, please contact our 鶹 prime customer service and we'll offer you a replacement or a full refund.
What? 500 dollar just repair these dents? Are you kidding me? (when the 4S shop maintenance quoted price appear in front of your eyes) NO! NO! NO! You just need to pay the 49.99 dollars and you will removal all the dent (include large and small dent ) also you will enjoy the DIY dent removal fun. Our T bar paintless dent repair kit will help you to repair different kinds of the dents for the auto body motorcycle, refrigerator, washing machine.
No need to disassemble. No need sheet metal tools. No need to spray paint. Not worry it is difficult to use.
Our car dent remover tool provides 100% satisfaction services: Any reason you are not completely satisfied after receiving the tools, please contact our 鶹 Prime Service Customer Support Line and we will reply any of your questions about repair within 24 hours.
*Warm Tips: 1. For the operating method of the glue gun, please follow the steps in the manual. 2. The dent puller tool will not damage the original paint of the car when pull the dent. But if your dent has been repaired with paint, it may damage your secondary paint.
*Packing List: 1 pcs Pro Slide Hammer Dent Puller 1 pcs Metal Bridge Dent Repair Kit 5 pcs Trim Removal Tool 16 pcs Pro Black Puller Tabs 1 pcs Hot Melt Glue Gun(100w) 10 pcs Hot Melt Glue Sticks (11mm) 2 pcs Yellow Plastic Shovel 1 pcs Black Clean Cloth 1 pcs Empty Alcohol Bottle 1 pcs Instruction
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on 鶹. It also analyzes reviews to verify trustworthiness.
was a little skeptical about this product but I was definitely very surprised. I had a dent in the rear door of my SUV (thanks to a horrible tow company) which drove me nuts to look at. I didn't want to pay someone to take the dent out so I decided to order this product. I have to say that the variety of pull tabs made it really easy to find a tab that was suitable to repair the dent. The process is really easy, just heat the glue, apply to the pull tab, then place the tab on the dent area and allow it to cool. After a few minutes you can use the pull tool to pop out the dent. Rubbing alcohol easily removes the glue. I had a pretty large dent so I had to repeat the process a couple times to get the entire dent out but was super happy with the result. Did not damage the paint at all. Really inexpensive way to fix dents.
I bought this kit to pull some dents out of my truck due to an old oak limb breaking off and smashing my truck. I had never done bodywork before so this was new to me. I had some instructions but YouTube and the internet are full of helpful advice. So went to work on a semi-warm day and was satisfied with my progress. The temperatures of the metal panel and of the glue are of main importance. The tabs that came with it are strong and the Slide and Hand Puller work well. Overall I would recommend this Kit Just make sure you warm the panel you're working on and don't let the glue get so hot it gets air bubbles.
So I used this kit to get the dent out of my motorcycle gas tank and I’d say it worked pretty well. It took four pulls but it finally popped out. It didn’t affect the paint at all. However when I was getting the glue off the gas tank it left behind a bit of residue and when scraping the residue I accidentally took off part of my road runner sticker. But it wasn’t that bad.