CAMO MARKSMAN Pro-X1 Kit, Deck Tool, 700 Edge Screws & Bits, Edge Fastening Installation, 1/16" Spacing, Fits 5-1/4-5-3/4" Wood DeckingThe CAMO Edge Deck Fastening System is a fast, easy, and affordable way to install a fastener-free deck surface. Patented CAMO Edge Deck Screws have a rake tip that augers material out as you drive. The Pro-X1 Guide allows you to quickly install these screws through the edge of the deck board—not the surface. To use the Pro-X1 Guide, attach the driver bit (included with CAMO Edge Deck Screws) to your drill, load Edge Deck Screws on both sides of the Guide, and drive. It’s that easy! The built-in shoulder on the driver bit sets an automatic depth of drive which prevents over-driving the screw. The Pro-X1 Guide is ideal for treated lumber. It fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board and creates an automatic 1/16 in. (1.58mm) spacing which is perfect for the typical shrinkage that occurs in treated lumber. Hide your deck screws with the CAMO MARKSMAN system. Edge fasteners are hidden deck screws designed for any wood or composite board in a square or grooved profile. Some of the most common deck tops any board type including square or grooved composite, pressure-treated wood, PVC, or hardwoods,. Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners. Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking. Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place. Available in PROTECH exterior coating and 316 stainless steel.