Manufacturer | KAISAL |
---|---|
Brand | KAISAL |
Model | Fuel Injector Cleaner Kit |
Parcel Dimensions | 23.9 x 17.3 x 6.81 cm; 372 g |
Item model number | Fuel Injector Cleaner Kit |
Exterior | Brushed |
Manufacturer part number | &;L04 |
Item Weight | 372 g |
-
-
-
-
-
-
-
2 VIDEOS
-

Image Unavailable
Colour:
-
-
-
- To view this video, download
Fuel Injector Tester Cleaner Tool Kit 8 Pulse Modes Injector Tester 2 Fuel Injector Test Simultaneously DIY Cleaning Tools with 40in Power Cord,4 Injector Cleaner Adapters,Short Circuit Protection 12V
Purchase options and add-ons
- 【Test 2 Injectors Simultaneously】Fuel injector cleaner tester can help you diagnose and clean injectors, easily identify common faults such as stuck, blocked, leaked or burnt-out conditions of the fuel injector. Compared with other fuel injector cleaner and tester with only one pair of pulse output teminals(black&red test lead), our fuel injector tester has 2 pulse output teminals(two pairs of test leads), which can test two fuel injectors at the same time for comparison.
- 【8 Pulse Modes & Mode Lock Feature & LCD Display】The fuel injector tester kit is designed with LCD display and 8 pulse modes, which composed of 4 pulse signal output modes and 2 output voltage levels: Short/ Medium/ Long/ Continuous pulse modes + High/Low(12V/5V) power drive modes. This fuel injector cleaning machine can help you to identify good and bad injectors when the engine is off. You can choose any mode as your needs. And its mode lock feature ensures test condition uniformity.
- 【4 Size Adapters & Wide Compatibility】Our injector cleaner is compatible for 12V injectors of almost all vehicle models, for both EFI and GDI injectors.
- 【40inch Power Cord & 20inch Test Lead】The length of power cord is up to 40inch/100cm and its test lead is 20 inches,which is more convenient for you to connect and use. The wires are made of superior silica gel, which has better high and low temperature resistance. Fuel injector cleaning kit is powered by 12V battery or an external DC 12V (recommended at least 1.5A) power adapter. It works with engine off and can work with any fuel pressure tester(NOTE: Gasoline car only, NOT the diesel engine).
- 【Polarity Reverse Connection Protection & Short Circuit Protection】This fuel injector cleaner and tester is deigned with power input reverse connection protection and output short circuit protection function. In the case of a damaged fuel injector or a short circuit of the pulse output terminal, the power indicator light of the fuel injector cleaner tool will flash to prompt you.
- 【Additional Function & 3-Year Warranty】This injector tester cleaner kit can also be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals. We promise 3 years warranty. For the damage caused by non-human factors, welcome to contact us. We will send you a replacement.
- 【Package Included】1* Fuel injector cleaner tester with 2 pulse output teminal, 40inch power cord with 2 battery clamps, 4* Blue universal fuel injector flush cleaner adapters to fits four different size injectors, 1* Portable carrying bag.
- 【Warmly Note】The cleaning operation of fuel injector cleaning machine requires carburetor cleaner or injector aerosol (not included) and 12V DC battery power supply (not included). Please prepare these necessary tools before your cleaning.
Frequently bought together

Featured items to consider
- HiSport Fuel Injector 101 Micron Baskets Filter [6mm x 3mm x12mm] Universal Repair Seal Kits [20 Pcs]FREE Shipping by 鶹Get it by Wednesday, Aug 6
- HiSport Fuel Injector Seal Kits Rebuild Set Include O-rings, Pintle Caps, Seal Spacers, Filter Baskets with 1pcs Filter Removal Tool [8 Set]FREE Shipping by 鶹Get it by Tuesday, Aug 5Only 3 left in stock.
- Haneex 8Set Fuel Injector Repair Seal Kit for For 99-07 GM Chevy Silverado 1500 GMC Sierra FJ887 4.8/5.3/6.0L 17113553 25317628 12580681FREE Shipping by 鶹Get it by Tuesday, Aug 5Only 5 left in stock.
Product Description

NOTE: We promise a 3 years after-sales service. If there is any problem with the fuel injector tester, please let us know. Don't worry! We will send you a replacement.
Electrical Specifications:
Power supply : 12V battery or DC 12V (recommended 2A) power adapter
Working conditions: 0°C-40°C; relative humidity ≤80%
Storage conditions: -20°C-50°C; relative humidity ≤85%
Unit Size: 120*80*25mm
Weight: 0.34kg

WARMLY NOTE:
- The cleaning operation of fuel injector cleaning machine requires carburetor cleaner or injector aerosol (not included) and 12v DC battery power supply (not included). Please prepare these necessary tools before your cleaning.
- When using the fuel injector tester cleaner, please do not expose the cover and plastic housing to cleaning agents to avoid damage.
Additional Function: This injector tester cleaner kit can also be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals.

Mode 0: Standby state, no output
Mode 1: Single Pulse Low Power Mode: when the PULSE key is pressed, the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds.
Mode 2: Short Pulse Low Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds.
Mode 3: Long Pulse Low Power Mode: the fuel injector cleaner tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
Mode 4: Continuous Pulse Low Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.
Mode 5: Single Pulse High Power Mode: the injector tester will send out a pulse with a pulse width of about 255 milliseconds.
Mode 6: Short Pulse High Power Mode: the injector tester will send out 50 pulses with a pulse width of about 7 milliseconds.
Mode 7: Long Pulse High Power Mode: the injector cleaner tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds.
Mode 8: Continuous Pulse High Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds.
Note: During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output.

2 PULSE OUTPUT TERMINALS
DC INPUT PORT ( 12V )
STRONG ALLIGATOR CLIP

Operating Instructions:
- Turn off the car's engine.
- Remove the wire plug of the vehicle injector to be tested, and then connect the two pulse output terminals of the fuel injector tester to the vehicle injector.
- Then connect the red clip of the injector tester to the positive terminal of the 12V car battery, and connect the black clip of the injector tester to the negative terminal of the car battery.
- Insert the DC plug into the port of the fuel injector tester.
- Press MODE SET key to select the desired pulse signal output mode, and the screen will display the currently selected mode.

NOTE:
1. Before using this fuel injector tester, the engine of the car must be turned off.
2. Do not smoke or ignite near the car.
3. Do not splash the fuel of the car on the hot engine parts.
4. Only use this injector tester in a ventilated place.
Do not inhale exhaust fumes from vehicles and vapours.
5. Do not get close to any rotating (or moving) parts of the car, and do not touch any heat-generating parts of the car.
6. Do not short-circuit the positive and negative poles of the car battery.
7. Do not touch any car parts with dangerous voltage.
8. Always follow the warnings, cautions and related maintenance instructions in the vehicle maintenance manual.
9. Wear qualified goggles.
10. After the test is complete, all disconnected vehicle connections should be properly restored.
Product information
Technical Details
Additional Information
ASIN | B0CD21RTSN |
---|---|
Customer Reviews |
4.4 out of 5 stars |
鶹 Rank |
|
Date First Available | July 28 2023 |
Feedback
Brands in this category on 鶹
Customer reviews
Top reviews from Canada
Top reviews from other countries
- Matt AReviewed in the United States on April 2, 2025
5.0 out of 5 stars Effective tool for testing injectors.
Verified PurchaseThis thing works great! I used it to test some old injectors and compare them to the new ones that I'm about to put in the Jeep and I could visibly see the difference in the spray patterns between the old and new injectors. Just a side note, go to any parts store and get a can of brake parts cleaner or carb cleaner and pull the nozzle off. If it has a little white nipple sticking up, you can use it to pressurize the adapter and the injector will spray the cleaner so you can see what it's doing. Just hold the blue adapter in the palm of your hand and use the first two fingers to hold the injector in the adapter because the pressure from the can of cleaner will make the injector fly out. Also, please remember to point the injector in a safe direction and away from your face when you press the button to activate the injector. I found the 1,2 and 5,6 settings to be most effective for basic testing. They will be listed in the instruction manual, but they're basically low and high power single and rapid pulse settings, respectively. Use with caution and I think you'll be very satisfied with it.
- Daniel OuelletteReviewed in the United States on June 23, 2025
5.0 out of 5 stars Good unit for the money
Verified PurchaseWhy did you pick this product vs others?:
Saw a review done on it, and the price point was right.
Ease of installation:
Very easy and straight forward to use. It gets cumbersome when you try to juggle the solvent cleaner can (carb or brake cleaner) and the device the injector uses to plug into it.
- retrofitReviewed in the United States on December 12, 2024
5.0 out of 5 stars cheap insurance.
Verified PurchaseI was looking to purchase bigger injectors but wanted to take the cheap route- I bought 2 sets of injectors that had less than favorable reviews due to some injectors being DOA- enter this tester to save me the hassle of installing injectors only to learn they need to be swapped. Out of the 8 injectors, this saved me the hassle and found 2 DOA injectors- and all of this cost less than a single injector from the dealer... time and money well spent in my case- and honestly, seems like good practice to test EVERYTHING, regardless of vendor reputation- because duds do happen!