Got it on sale for $50, follow other reviewers and added the PEX B pipe. You can get either Red or Blue pipes in 鶹 too. I've listed the part below.
I did it in 4 hours because I had to go get the drill bit as the biggest one I got was 1/2in. But if you have all the tools below, you should able to get it done in about an hour.
New Box cutter
Marker for the length that you need to cut
5/8 drill bit (Drill on top of a 2 X 4 then widen it bit more both side)
A round metal filer (Smaller than 1/2 just to smooth things out inside then use a waste PEX to check fitting)
WD40 spray it inside the new hole when you ready to install
Trampoline spring pull tool or small T-Hook from 鶹 (You WILL have challenge and loop the PEX through the canopy without it)
A 6+in waste PEX (insert it into the canopy side that you want to insert the new PEX pipe so the hole is expand for easier fit, leave about 1/4in so the new PEX pipe can get in)
A 48in Fiberglass Driveway Marker or a 3ft+ rod (Insert inside the canopy and into the 6+in waste PEX pipe then connect to the new PEX that going through the loop - It straight the canopy out so the Trampoline Pull tool can pull the canopy over the PEX pipe at ease)
50FT U860R50 PEX Pipe Red $14
50FT U860B50 PEX Pipe blue $19
Now, The top piece is inverted arch and I think is because the PEX was too heavy, I mean you might want to skip the PEX on center top support if you want it look good but without additional support.
| Manufacturer | Intex Recreational Inc. |
|---|---|
| Place of Business | Long Beach, CA 90810,US |
| Item model number | 28054E |
| Product Dimensions | 60.96 x 12.7 x 91.44 cm; 5.13 kg |
| ASIN | B08D6X7K6B |
