| Brand | Wishiot |
|---|---|
| Manufacturer | Wishiot |
| Part Number | LS0829X5+LS0036 |
| Memory storage capacity | 2 GB |
| RAM memory technology | LPDDR3 |
| OS | Linux |
| Processor Brand | Espressif |
| Processor Type | ARMv7 |
| Number of Processors | 1 |
| Compatible Devices | Arduino UNO, Mega2560, Nano, ESP8266, ESP32, Wemos D1 mini, Raspberry pi |
| Mounting Hardware | 5 X SD card modules, 1 X 40Pin Dupont cable (male to female) |
| Batteries included | No |
| Batteries Required | No |
| Wireless Standard | 2.4 GHz Radio Frequency |
| Connector Type | SPI |
| Manufacturer | Wishiot |
| Manufacturer reference | LS0829X5+LS0036 |
| Parcel Dimensions | 15.4 x 10.4 x 1.6 cm; 62 g |
| ASIN | B07V78MD81 |
Frequently bought together
This item: Wishiot 5pcs SD Card Module Mini TF Card Reader Sensor with SPI Interface Onboard Level Conversion +1pc 40P Male to Female Dupont Cable for Arduino Mega2560 Nano ESP8266 ESP32 Wemos D1 Mini
$13.99
Get it by Monday, Feb 23
Only 10 left in stock.
+
$26.95
Get it by Monday, Feb 23
In Stock
+
$12.99
Get it by Monday, Feb 23
In Stock
Total price:$00
To see our price, add these items to your cart.
Choose items to buy together.
Videos for similar products
Product Description
5 X SD card module 1 X 40Pin Dupont cable male to female
The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver.
Pin diagram:
CS(chip select) / SCK(serial clock) / MOSI(SPI Bus Master Output/Slave Input) / MISO((SPI Bus Master Input/Slave Output) / VCC(Power supply 4.5V-5.5V) / GND(ground)
6Pin male header is pre-soldered.
You can plug female/male dupont cable directly with breadboard or other development board which has female header onboard.
Dimension: 4.2cmX2.4cm(1.65inX0.94in)
nterface level: 5V or 3.3V
Power supply: 4.5V to 5.5V, onboard 3.3V regulator circuit
Currency: 0.2-200mA
Communication interface: SPI
Positioning holes:
4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination.
Micro SD card connector:
This SD card module has a self-elastic card holder, which allows you to easily insert the card for easy operation.
3.3V regulator circuit:
LDO regulator output 3.3V for level conversion chip, Micro SD card supply.
Level conversion circuit:
Micro SD card to signal the direction of converts 3.3V, MicroSD card interface to control the direction of the MISO signal is also converted to 3.3V, general AVR microcontroller systems can read the signal.
40pcs in Row Male to Female Jumper Wire Dupont Cable
Quantity:40 PCS
Բٳ：20
Wire diameter：2.54mm
SCM system can be completed within a file MicroSD card .
Support Micro SD card≤2G
Micro SDHC card(high speed card)≤32G
Please make sure the card format is FAT32
- Package inculdes:
- 5 X Sd card module
- 1 X 40Pin Dupont cable male to female
Connection diagram display 1
Connection diagram display 2
How to use
If you use Arduino 2560, you need correct the CS pin number in the code. (chipselect=53)
The brands and models mentioned above are only used to show the suitability of the products.
Product information
Additional Information
| Date First Available | July 29 2019 |
|---|---|
| Customer Reviews |
4.4 out of 5 stars |
| 鶹 Rank |
|
Feedback
Sponsored
