| Manufacturer | HANMATEK |
|---|---|
| Place of Business | cs_us@hanmatek.cn |
| Item model number | SF1 |
| Product Dimensions | 18.4 x 10 x 4.8 cm; 200 g |
| ASIN | B0BNDKMJXQ |
Frequently bought together
This item: HANMATEK Stud Finder Wall Scanner with Pro Smart Sensor, 5 in 1 Upgrade Wood Exact Mode Stud Finder Tool for The Center Edge of Metal, Studs and AC Wire, Pipe Locator for Walls
$39.99
Get it by Monday, Nov 10
In Stock
+
$16.99($0.07/count)
Get it by Monday, Nov 10
In Stock
+
$101.24($1.49/pound)
Get it by Monday, Nov 10
In Stock
Total price:$00
To see our price, add these items to your cart.
Choose items to buy together.
Videos for similar products
Product Description
AC Scan Detection
- Up to 50 mm/1.97in;
- Multiple detection, the location will be more accurate;
- Detection units can be switched for all modes (cm/in/mm).
Exact Mode (Wood)
- Up to 20mm/0.79in;
- long press to switch exact mode/deep mode.
Depth Mode (Wood)
- Up to 38mm/1.5in;
- Wood detection mode can detect objects in plaster drywall, plywood sheathing, bare wood flooring, coated wood walls.
Metal Scan Detection
- Detects metal up to 120mm/4.72in;
- Non-ferrous metals up to 100 mm / 3.94in;
- Detection of metal will be displayed on the display with the detection operation synchronized with the detection depth value.
Step 1: Calibration before scanning
- Short press the detection mode button, and wait for automatic calibration;
- You can choose the detection mode, and detection depth, the instrument defaults to metal mode.
Step 2: Scanning walls
- Move the scanner slowly along the wall. Do not lift the instrument or apply additional pressure;
- Note: If you shake or lift the instrument carelessly, you need to recalibrate it.
Step 3: Find the center of the target
- The progress bar on the screen changes with the distance of the object;
- When the signal is full, the indicator light flashes and a ticking sound is emitted, meaning that the center of the object has been found.
NOTE:
●Sometimes due to various environmental factors, the stud finder may not be able to calibrate automatically, and a wrong alarm signal may appear, please calibrate manually.
●If the detector has just been calibrated on the wooden stand, you need to move the tool out of the range of the wooden stand and detect the wooden stand again.
● If you are receiving erratic scan results, it may be due to moisture, humidity inside the wall cavity or drywall, or recently applied paint or wallpaper that has not fully dried. While moisture may not always be visible, it can interfere with the tool's sensors. Please allow the walls to dry for a few days.
●For some environmental factors or uneven surfaces, it is difficult to detect wooden nails using the wood studs detection mode. It may be easier to find these items by changing the metal detection mode to locate the nails that hold the material to the wood.
● Depending on the proximity of wires or pipes to the wall, the stud finder can detect them in the same way as wood studs. Care should always be taken when nailing, cutting or drilling holes in walls, floors and ceilings that may contain these items.
Product information
Additional Information
| 鶹 Rank |
|
|---|
Feedback
From the brand
-
HANMATEK was established in 2008. With over 10 years of manufacturing and R & D experience in the measuring instruments industry, it works on technological innovation, product usability improvements, and the creation of more economical and stable solutions.
HANMATEK is Dedicated to Providing You with the Highest Quality Products and Satisfied After-Sales Service that Make Your Life Simple and Better.
-
New A-R-R-I-V-A-L
-
New A-R-R-I-V-A-L
4x360° Cross Green Laser Line
-
New A-R-R-I-V-A-L
Oscilloscope
-
New A-R-R-I-V-A-L
Smart Digital Multimeter
-
Tester
-
Network Cable Tester
-
Stud Finder
-
Tool
-
Electric Screwdriver
-
Soldering Station
-
Oscilloscope
-
Clamp Meter
-
Voltage Tester
Brands in this category on 鶹
Sponsored
