�鶹��

• 3-Second Heating: 1000W power for rapid warming.
• 3 Modes: Cool Air, Low Heat, High Heat.
• Timer Function: 1-12 hours freely selectable.
• Thermostat Settings: Select ideal temperature within 59℉-95℉ (15℃-35℃) range.
• 90° Oscillation: Wide-angle coverage for broader warmth distribution.
• Remote Control: Convenient operation via remote control.
• LED Digital Display: Clearly shows settings and real-time temperature.
• Tip-Over Protection: Immediately shuts off upon tipping, beeps for 15 seconds, displays E1 on screen.
• Overheat Protection: Heating stops at 194℉/90℃ while fan continues operation.
• NTC Protection: PTC heating stops at 131℉/55℃ with fan running; resumes operation below 104℉/40℃.
• Intelligent Heat Dissipation: 30-second fan delay after shutdown ensures high-temperature components cool down.

• 3-Second Rapid Heating: Utilizing energy-efficient PTC ceramic heating technology, the office space heater achieves rapid heating within 3 seconds.
• 3-Level Settings: Features 3 temperature settings (Cool Air, Low Heat, High Heat) for year-round use in extreme weather.

• Timer Function: The electric space heater indoor supports 1-12 hour timer settings with low-noise operation. Customize heating schedules based on daily routines to effectively conserve electricity.

(The remote control features a Timer Cancel Button to deactivate the current timer setting at any time.)

• Thermostat Setting: The electric space heater is equipped with a digital thermostat, allowing you to freely select your ideal temperature between 59℉-95℉ (15℃-35℃) via the remote control.

(The remote control features a Constant Temperature Cancel Button to deactivate the current thermostat setting at any time.)

• 90° Oscillation: The room heater features a 90° wide-angle oscillation function, evenly dispersing warm air to ensure heat coverage throughout the entire room. This expands the heating range, making it ideal for small living rooms, bedrooms, offices, bathrooms, basements, and more.

（After activating the oscillation function, press the Oscillation Button to pause the oscillation and directly select the desired warm airflow direction）

Short press: Swing/Pause.

Long press: Switch between Fahrenheit and Celsius temperature.

NOTE:

1. Thermostat setting and mode setting cannot be activated simultaneously. When one is set, the other will automatically disappear from the display.

2. If you turn off the heater without unplugging it, the previous settings will automatically resume upon restarting. All settings will be cleared if the power cord is unplugged.

3. After setting the timer, heating mode, or thermostat, the display will show that setting for 5 seconds, then display the real-time room temperature.

4. When the machine is shut down, the fan will continue to run for 30 seconds to ensure that high-temperature components are adequately cooled.

5. Long press Oscillation Button to switch between Fahrenheit and Celsius temperature.