- VIDEO
Image Unavailable
Colour:
-
-
-
- To view this video, download
Frequently bought together
Videos for similar products
Product Description
0-140 PSI Engine Oil Pressure Tester
The oil pressure gauge is a testing tool designed to check the pressure of the fuel pump and check the operation of the fuel system components.
The automotive oil pressure tester kit includes everything you need for basic fast and effective leak detection of low range gasoline engine cylinders in cars, trucks, motorcycles, ATVs, snowmobiles, boats, etc.
Oil Pressure Gauge
- High precision pressure gauge
Dual scale (psi and bar) with readings from 0 to 140 psi and 0 to 10 bar.
Red concentrated part indicates a danger that needs immediate repair.
Resin dial and precise pointer, please use with care for precision instruments.
2. Flexible hose
4 feet long. Maximum weight 300 psi.
Connects to metal adapter or 90¡ã elbow fitting adapter or a combination of both.
Specifically designed for reuse of high quality nylon resin rubber material. Resistant to oil and corrosion.
3. Quick function
a. Pressure release button
Easy to operate, press the button and instantly set the measured pressure value to zero.
No need to repeatedly disconnect the gauge hose to release the test pressure.
b. Time-saving quick coupling
4. Bearings, stronger bite force; coupling nut has deep roll holes for quick finger tightening.
Packing List
- 1 * Oil Pressure Gauge with Hose
- 1 * 90¡ã Elbow Coupling Adapter
- 1 * R 1/8 DIN 2999 Adapter
- 1 * 1/8" x 27 NPT Adapter
- 1 * 1/4" x 18 NPT Adapter
- 1 * 3/8" x 20 UNF Adapter
- 1 * 1/2" x 20 UNF Adapter
- 5 * Metal Adapters (M10 M12 M14 M16 M18)
- 1 * Instruction
- 1 * Case
Adapter Use
1. Direct Connection : You can install a steel adapter directly on the quick connector.
2. Indirect Connection : You can install a 90¡ã elbow fitting adapter directly on the quick connector and then install a steel connector on top of it.
10-piece Steel Adapters
- Steel to provide maximum strength and longevity. Each has an o-ring to maintain a good seal.
- Easy to identify. Straight steel adapters are marked with numbers from 1 to 10.
One-piece Brass Adapter
- 90¡ã elbow fitting adapter for limited access applications.
- Forged adapters for connecting male and female adapters at an angle.
- 9 spare o-rings in different sizes for replacement.
- With them, the tool works with a long-lasting seal even under extreme conditions and prevents leaks.
Note
1. Do not use wrenches. Do not apply excessive force when using tools. 2.
2. Wear protective masks and gloves throughout the operation. Work in a well-ventilated area.
3. Professional tools must be operated by professionals or under the guidance of professionals.
4. When actually measuring, each cylinder should be tested 2-3 times repeatedly.
5. Clean with mild detergent or solvent, then wipe with a damp cloth.
6. Before use, please check the parts for misalignment, cracks and other conditions that may affect the operation accuracy.
