CV AXLE BOOT KIT, FOR THE CAR DRIVETRAIN PUT ON A STRONG ARMOR
Product Attributes
Colors: Black
Sizes: 4.72x3.54x3.54 inch
Weight: 8.26 oz
Material: Silicone
Packaging: 2 x CV Boots + 2 x Large Stainless Steel Clamp + 2 x Small Stainless Steel Clamp +6 x Nylon Cable Ties
Product Feature & Functions
1. By avoiding the entry of dust and impurities and the leakage of grease, the CV axle boot kit helps maintain the transmission efficiency and accuracy of the CV axle, reduces vibration and noise, and makes the vehicle ride smoother and quieter. At the same time, it also reduces the failure rate of CV axle, reducing maintenance costs and time costs
2. The CV axle boot is made of silicone and has a certain degree of flexibility and elasticity. Its shape is similar to that of a bellows sleeve, which can be tightly wrapped around the outside of the axle, completely enveloping it
3. The package contains stainless steel clamps and cable ties to securely attach the cv joint boot to the axle's journal and housing for enhanced sealing performance
Installation Procedure
1. Apply Grease: Apply appropriate amount of grease inside the car axle. The role of grease is to reduce friction, reduce wear, and help to dissipate heat and avoid rust. Keep the grease is evenly spread, not too much or too little
2. Put Axle Boot: With the tapered mounting tool, carefully put the new axle boot on the car axle so that it is completely covered. Note that the opening direction of the axle boot should be placed correctly, usually the large mouth toward the outside and the small mouth toward the inside of the car axle
3. Fix Axle Boot: Use the clamp or cable tie contained in the package to firmly fix the axle boot on the car axle. Keep that the clamp or clip is properly installed and properly tightened. Do not loosen or fall off the dust jacket or damage the car axle because it is too tight
Note:
1. The real color of the item may be slightly different from the pictures shown caused by many factors such as brightness of your monitor and light brightness
2. Please allow slight manual measurement deviation for the data
3. Be sure to check the size of the required product carefully before placing an order to avoid buying mistakes
