| Manufacturer | LIZRHA |
|---|---|
| Parcel Dimensions | 58 x 52.3 x 39.2 cm; 11.4 kg |
| ASIN | B0D9NKBWHK |
Videos for similar products
Product Description
65CC Gas Powered Backpack Leaf Blower 2 Cycle 3.8HP
- Gasoline engine: 65cc gas engine 2-Stroke
- Power: 3.8HP
- Item weight: 10.95KG
- Fuel Tank Capacity: 1.6L
- Air volume: 884CFM
- Air speed: 8790RPM
- Air speed: 248MPH
- Fuel mixture: 1:25 (2-cycle engine oil/Gasoline)
How to Mix the fuel
1. Take out the white fuel mixing jug.
2. Confirm the Gasoline and Oil Ratio. The ratio of engine oil to gasoline is 1:25
3.Pour the Gasoline into the large side of the jug,then pour the engine oil into the small side.Ensure the Engine Oil and Gasoline are on the same scale line. (e.g.the fuel scale is on 10,the engine oil scale also should be on 10 )
4.Shake the Jug to mix the Oil and Gasoline Mixture.
5.Pour the Mixed fuel into the fuel tank. Pour Pure Engine Oil into the Chain Oil tank.
How to start a COLD engine?
- 1. Move switch to START position.(Push the switch upward.)
- 2. Press the primer bulb to fill them with oil fully.
- 3. Open the choke knob (push up)
- 4. Then pull the starter handle powerfully 3-5 times（Max 6 times）stop pulling when you hear motor sound.
- 5. Push the choke knob back to the off position.(push down)
- 6. Then pull the starter handle powerfully 2-4 times to start the engine.
- 7. Hold down the throttle trigger then it’s can work.
------------------------------------------------------------------------
How to start a WARM engine?
1. Move switch to START position.(Push the switch upward.)
2. Then pull the starter handle powerfully 3-5 times（Max 6 times）stop pulling when you hear motor sound.
3. Hold down the throttle trigger then it’s can work.
Product information
Additional Information
| 鶹 Rank |
|
|---|
