Product description
Car Relay Tester Kit with Relay Puller, 12V Automotive Relay Tester, Car Battery Relay Fuse Tester Detector Checker for Auto Car Motorcycle Repair
Why Chose Our Automotive Relay Tester?
1.Quick & Accurate Testing: Our 12V auto relay diagnostic tool can diagnose relays in seconds with automated precision – no multimeter expertise needed.
2.User-Friendly Operation: With clear LED indicators and simple testing process, our automotive relay tester is a great relay testing kit for DIYers and pros alike.
3.Broad Compatibility: Our car relay tester works with over 90%+ 12V automotive relays (4-pin/5-pin, 20Ω+ coils).
4.Pocket-Sized: The auto relay tester features a compact & portable design that easily fits in your toolbox or glove compartments;With a reinforced ABS casing, the battery relay detector checker can survive workshop/roadside conditions.
5.Equipped with Relay Puller: Allows you to safely remove the car relays without any damage.
How to Use?
1. Connect the power leads to the car battery, black alligator clip to negative terminal, red alligator clip to positive terminal.
2.Relay Tester is powered up when the LED illuminates in RED.
3. Check the relay before plugging into the tester. If it's a 4 pin relay,select "4 pin" on the tester. If it's a 5 pin relay, select "5 pin" on the tester.
4. Plug in the relay into one of the three receptacles.
5. Press the "Test" button.
6. Tester will check the pin configuration of the unknown relay.Tester will light the RED LED if the unkonwn relay is not the same to the most of common automotive relaysor the pin of the unknown relay is destroyed.
7. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime.
8. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED.
9. Disconnect power leads from the car battery and remove relay from the tester.
Attention:
1. The car battery must be 12 battery, and the voltage of the battery is among11V-15V.
2.Ideal for coil resistance above 20 ohms.