8MILELAKE 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer, Ball Joint & Tie Rod Tools

To see product details, add this item to your cart. You can always remove it later.

The enhancements that you chose aren't available for this seller. Details

${cardName} not available for the seller that you chose

${cardName} unavailable for quantities greater than ${maxQuantity}.

Ships from

�鶹��

Sold by

Freebird Trading

Returns

Eligible for Return, Refund or Replacement within 30 days of receipt

Payment

Secure transaction

Add gift options

Add to Wish List

Added to

Unable to add item to Wish List. Please try again.

Image Unavailable

Image not available for
Colour:

To view this video, download

8MILELAKE 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

Brand: 8milelake

411 ratings

To see product details, add this item to your cart. You can always remove it later.

Purchase options and add-ons

【APPLICATION】The Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle
【COMPATIBLITY】The Ball Joint tool compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints
【MATERIAL】Heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
【PACKAGE LIST】It includes: 1x C-frame ball joints press and forcing screw, 3x installation adapters with cups, 3x removal adapters with cups, 3x receiver tubes
【PORTABILITY】come with a durable storage case, convenient to collect the tools

› See more product details

�� Report an issue with this product

This item: 8MILELAKE 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

$44.59

Get it by Thursday, Jul 24

Sold by Freebird Trading and ships from �鶹�� Fulfillment.

DAYUAN 5pcs Professional Front End Service Tool Kit, Pitman Arm Puller, Ball Joint Separator Tie Rod Remover Tool

$49.95

Get it by Friday, Jul 18

In Stock

Sold by Hippoproducts and ships from �鶹�� Fulfillment.

Acymner Pickle Fork Ball Joint Separator Set | 5PCS Pickle Fork Tool Kit, Ball Joint Tie Rod Pitman Arm Removal Tool, Fork Type Separator Kit for Cars and Light Trucks

$29.29

Get it by Monday, Jul 21

In Stock

Sold by ZEHONG and ships from �鶹�� Fulfillment.

Total price:��$00

To see our price, add these items to your cart.

Try again!

Details

Added to Cart

Some of these items ship sooner than the others.

Show details Hide details

Choose items to buy together.

Brief content visible, double tap to read full content.

Full content visible, double tap to read brief content.

Videos for similar products

Product Description

Tips:

NOT FIT FOR 1992–1997 Ford 3/4-Ton and 1-Ton 2WD Vans;
NOT FIT FOR 1993–2004 Grand Cherokee;
NOT FIT FOR 1994–2001 Dodge Ram 4WD 1/2-Ton Pickup ;
NOT FIT FOR 1984–1989 Jeep Wagoneer, Cherokee, Comanche;
NOT FIT FOR 1987–1998 Jeep Wrangler ;
NOT FIT FOR 1986–1997 Honda Accord ;
NOT FIT FOR 1988–2000 Honda Civic ;
NOT FIT FOR 1988–1991 Honda CRX ;
NOT FIT FOR 1993–1999 Honda del Sol ;
NOT FIT FOR 1983–1998 Honda Prelude ;
NOT FIT FOR 1999-2004 Odyssey Vans ;

	8MILELAKE 10pcs Ball Joint Press Removal	8MILELAKE 14PCS Master Ball Joint Service Adapter Set	8MILELAKE 21PCS Master Ball Joint Press Kit	8MILELAKE 6pc Front End Service Tool Kit	8MILELAKE Ball Joint Tie Rod and Pitman Arm 5-Piece Tool Kit	8MILELAKE Universal Ball Joint Separator Tool
	Buying Options		Buying Options	Buying Options	Buying Options
Customer Reviews	75	79	70	190	—	176
COLOR	RED	BLUE	BLUE	BLUE	BLUE	BLACK
MATERIAL	Heavy-duty Forged Steel	High Carbon Steel	Steel	Heavy Duty Forged Alloy Steel	Steel	Heat Treated Drop Forged Steel
NUMBER OF PARTS	10 PCS	14 PCS	21 PCS	6 PCS	5 PCS	1 PIECE

Product information

Technical Details

Manufacturer	‎freebirdtrading
Place of Business	‎Hebron, KY 41048, US
Brand	‎8milelake
Product Dimensions	‎30.48 x 38.1 x 10.16 cm; 6.9 kg
Manufacturer reference	‎RT0852
Is discontinued by manufacturer	‎No
Manufacturer part number	‎RT0852
ABPA Partslink number	‎RT0000852
Item Weight	‎6.9 kg

Additional Information

ASIN	B0716NX5D7
Customer Reviews	411 ratings 4.2 out of 5 stars
�鶹�� Rank	#76,137 in Automotive (See Top 100 in Automotive) #94 in Ball Joint & Tie Rod Tools
Date First Available	May 8 2017

Feedback

Would you like to tell us about a lower price?

Compare with similar items

	This Item 8MILELAKE 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer	Recommendations Punmew Ball Joint Press Kit 10 pcs Ball Joint Press & U Joint Removal Tool Kit with 4 * 4 Adapters, Fits for Most 2WD and 4WD Vehicles & Light Trucks	�� KUNTEC 4 in 1 Heavy Duty Ball Joint Press U Joint Removal Installation Tool Kit with 4 Adapters for Most 2WD and 4WD Cars and Light Trucks	�� HZAUTOS 10PCS Heavy Duty Ball Joint Removal Tool, U Joint Removal Tool, Ball Joint Press Tool Kit with C Frame and 4 * 4 Adapters, Fits for Most 2WD and 4WD Vehicles & Light Trucks	�� Acymner 14PCS Master Ball Joint Remover Installer Adapter Tool Set for Ball Joint Replacement and Repair - 2WD and 4WD Cars, Trucks and SUVs	�� BTSHUB Ball Joint Press Tool Set - 10Pc Ball Joint Remover Tool Ball Joint Press Kit Service Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks and 4WD Cars and Light Trucks
	Try again! Details Added to Cart spCSRF_Treatment	Try again! Details Added to Cart spCSRF_Treatment	Try again! Details Added to Cart spCSRF_Treatment	Try again! Details Added to Cart spCSRF_Treatment	Try again! Details Added to Cart spCSRF_Treatment	Try again! Details Added to Cart spCSRF_Treatment
Price	-5%��$44.59 Was: $46.99	$46.09	$46.95	$58.99	$39.99	$46.99
Delivery	Get it by Thursday, Jul 24	Get it by Friday, Jul 18	Get it by Friday, Jul 18	Get it by Friday, Jul 18	Get it by Friday, Jul 18	Get it by Friday, Jul 18
Customer ratings	4.2411	4.19	4.177	4.2120	4.632	3.880
Sold by	Freebird Trading	Punmew	KUNTEC	HANG ZE	ZEHONG	BISHUB

Similar Brands on �鶹��

Page 1 Of 1Start Over

Customer reviews

411 global ratings

How are ratings calculated?

Review this product

Write a customer review

Customers say

Customers like the functionality, ball joint retention, and appearance of the product. They mention it works well, gets the job done, and takes that ball joint out in no time. Customers are also happy with the ball joint application and press. However, some customers have reported that the threaded shaft bends at the end, the big bolt snaps, and the universal design is too big for tight spaces. Opinions are mixed on the quality.

Select to learn more

Functionality Ball joint retention Appearance Ball joint application Ball joint press Durability Fit

68 customers mention "Functionality"62 positive6 negative

Customers like the functionality of the product. They mention it works well, gets the job done, and works great for any wrench turner out there with newer vehicles. Customers also say it's useful to fix trucks.

"Worked great but a little to short for my truck 1997 f250hd" Read more

"Fast shipping and works great" Read more

"very solid and fast shipping... Great product" Read more

"...Worked just as expected and got the job done." Read more

12 customers mention "Ball joint retention"12 positive0 negative

Customers are satisfied with the ball joint retention product. They mention it makes the task easy and quick. Customers also say it takes that ball joint out in no time and makes installation a snap.

"Easy to use, Removed and installed with no issues .The adapters in this kit worked perfect for my 2002 GMC." Read more

"...Installing the ball joints was pretty easy as I have a Makita impact that is easily capable of over 700 ft lbs of torque if required and it drove..." Read more

"...It certainly made the job a lot easier." Read more

&��ܴǳ�;...��’s fairly easy to use could have used a grease fitting to help with longevity but was the right price." Read more

5 customers mention "Appearance"5 positive0 negative

Customers like the appearance of the product. They mention the clamp and caps look good.

"don't try it yet.....but look great and look well made....." Read more

"...with my finger, so the pneumatic part will never work, C clamp and caps looks good, but the housing rings seems low quality...." Read more

"This item worked well. It was the best one of it's style that I used...." Read more

"Looks and works excellent. Will highly recommend. Cheap price but not cheap quality." Read more

4 customers mention "Ball joint application"4 positive0 negative

Customers are satisfied with the ball joint application of the product. They mention it can be used for ball joints and would be great for really small.

"...best cylinders and ends to use, but once I got going, the ball joint pessed in well. A few tips... Grease the threads. Go slow...." Read more

"...Can be used for ball joints but I suspect that the kit may also work with pressed-in bushings...." Read more

"...Probably would be great for really small ball joints" Read more

"Amazing ball joint tool..." Read more

4 customers mention "Ball joint press"4 positive0 negative

Customers are satisfied with the ball joint press. They mention it pressed in fine and the threads are fine. Some say it may not work for all vehicles.

"...Pressed in fine as well... Using Moog parts. Threads are fine." Read more

"...' kit and is not good for a 2000 Dodge Dakota bottom ball joints - press is OK but the tubes and spacers are not right" Read more

"Decent ball joints press but may not work for all vehicles...." Read more

"Great press..." Read more

14 customers mention "Durability"0 positive14 negative

Customers are dissatisfied with the durability of the product. They mention the threaded shaft bends at the end when pressing in ball joints, the center pin bends, and the top removal tips start to bend. Some say the big bolt snapped, and the threads stripped the first use.

"I use and the threads galled, it still works but the threads were pretty sloppy from the start!" Read more

"...lemon one or just badly made but just to pull out old one top removal tips start to bend and when i was trying to install cause of top tips bend..." Read more

"priced well but not strong. First use and already bent up the cups. Worked fine for installing ball joints...." Read more

"End of C Clamp snapped off on the second ball joint....supplier has seen a replacement...Thank you." Read more

8 customers mention "Fit"0 positive8 negative

Customers are dissatisfied with the fit of the product. They mention it's too large to fit in the gap, the universal design is too big for tight spaces, and doesn't fit all ball joints. Some also say the clamp lacks a big enough opening for the ball.

"So I bought the wrong set, this was a little too small for me...." Read more

"Didnt fit my Ram 1500. Made the job a lot harder then it needed to be. Maybe the "deluxe" set would have the receiving cup I needed...." Read more

"Does what its supposed to do except for the fact that the c clamp didnt have big enough of an opening for the ball joint the tab and the adapters...." Read more

"C-clamp should be bigger and threads should be fine thread" Read more

Reviews with images

See all photos

Top reviews from Canada

There was a problem filtering reviews. Please reload the page.

John T
Works as good as the Pro Shop Unit I used the last Time Great Value for the $$
Reviewed in Canada on September 2, 2020
Verified Purchase

I was a bit skeptical at first with some of the reviews on here for this tool but I needed to get something as the shop I borrowed the kit from the last time could no longer lend it to me. I was looking for a decent tool at a reasonable price as I may only use this once every three or 4 years maybe less. I was very impressed with the initial quality when I opened the box, the carrying case is not super sturdy but it is acceptable and should last providing it is not abused. The C clamp is very heavy and well made and pressed 4 ball joints out of a 1985 F150 4x4 with little trouble even with my initial mistakes. Installing the ball joints was pretty easy as I have a Makita impact that is easily capable of over 700 ft lbs of torque if required and it drove the new ball joints in with no flex in the C frame. I am planning on getting the kit with the additional cups etc to complete this tool and I highly recommend it to anyone who needs this type of tool. Also I greased the screw with lots of grease and you can barely see any of the black coming off the screw after all the use.

Read more

Helpful

Don Don
Worked Good.
Reviewed in Canada on February 19, 2024
Verified Purchase
This is not the best quality, that Made In Chana, But it works and done a excellent Job and cheap low price.

Read more

Helpful

Maurice
Good product and value!
Reviewed in Canada on December 29, 2020
Verified Purchase
Product was exactly what was required for the purpose. Which was replacing a rear ball joint in my Sebring. I actually found other uses for it as well, for example to compress disc brake calipers when installing new brake pads. This tool is heavy and appears to be well made. It is a bit bulky so had a bit of difficulty making it fit into smaller places but all the fittings seem to there so that you can make it work. They suggest not to use an impact gun so I heeded that warning. I was a bit concerned about being able to apply enough pressure with a ratchet but it worked easily. It certainly made the job a lot easier.

Read more

Helpful

Robert T
Worked On My Ford Explorer
Reviewed in Canada on August 30, 2021
Verified Purchase
I used this tool to press in new ball joints into the front lower control arm of my 2007 Ford Explorer. It took me a minute to figure out the best cylinders and ends to use, but once I got going, the ball joint pessed in well.

A few tips... Grease the threads. Go slow. In my case, I used a torque wrench. When the torque jumped from about 70 ft lbs to 100 ft lbs, the ball joint was fully in.

Read more

Helpful

L from Port Hope
Durable Ball Joint Service Kit
Reviewed in Canada on July 13, 2018
Verified Purchase
A durable kit that may save the trouble of having to remove suspension components (i.e., control arms) from the vehicle. An affordable alternative to a traditional hydraulic shop press. Can be used for ball joints but I suspect that the kit may also work with pressed-in bushings. It is important to note that this kit has one limitation: although the c-clamp part is made very strong, the force that it exerts is not truly axial (unlike a shop press) and for shallow bores may cause the joint being pressed in to advance crooked and not fully seat in the bore. As such I found that to keep the new ball joint advancing into the bore straight, you may need to rotate the press through 180 degrees (or 270 degrees at 3 x 90 degrees if you have room) to fully seat the ball joint. This is critical! I attached two photos of my recent ball joint replacement work on a 2001 PT Cruiser; one using the press to remove the old one and one using the press to install (both sides done). Unlike some YouTube videos I watched where the user had to cut the top off the old ball joint off, with the appropriate selection of the components in this kit, this is completely unnecessary! I note that there is no instruction manual included but this is not a significant issue because removal of ball joints and bushings is more related to the method for the particular vehicle being serviced than the tool being used.

Read more

L from Port Hope

Durable Ball Joint Service Kit

Reviewed in Canada on July 13, 2018
A durable kit that may save the trouble of having to remove suspension components (i.e., control arms) from the vehicle. An affordable alternative to a traditional hydraulic shop press. Can be used for ball joints but I suspect that the kit may also work with pressed-in bushings. It is important to note that this kit has one limitation: although the c-clamp part is made very strong, the force that it exerts is not truly axial (unlike a shop press) and for shallow bores may cause the joint being pressed in to advance crooked and not fully seat in the bore. As such I found that to keep the new ball joint advancing into the bore straight, you may need to rotate the press through 180 degrees (or 270 degrees at 3 x 90 degrees if you have room) to fully seat the ball joint. This is critical! I attached two photos of my recent ball joint replacement work on a 2001 PT Cruiser; one using the press to remove the old one and one using the press to install (both sides done). Unlike some YouTube videos I watched where the user had to cut the top off the old ball joint off, with the appropriate selection of the components in this kit, this is completely unnecessary! I note that there is no instruction manual included but this is not a significant issue because removal of ball joints and bushings is more related to the method for the particular vehicle being serviced than the tool being used.

Images in this review

8 people found this helpful

Helpful

sixx
This product totally failed.
Reviewed in Canada on July 17, 2020
Verified Purchase
Got the product very quickly even though I cancelled the order after 30 minutes after ordering. Was not able to cancel. Then the product doesn't have the 1 inch tube for ball joint removal. Had to go to a machine shop to get one cut. This unit was a fight from the beginning. Had to stop process as unit seemed like it was going to snap. Time sensitive matter so I eventually had a shop do the last one. They had the proper tubes for a 4x4. Ford 3/4 ton 4x4. Pay the extra money and get a good one. I will buy a proper kit for my other truck. Now they have their product - a refund would be in order. Last but not least - seems that Prime membership is a scam. It takes a multiple days to get products with Prime membership, but only takes 1.5 days to return it.

Read more

One person found this helpful

Helpful

Mike Tunstall
Ok for light use
Reviewed in Canada on October 5, 2020
Verified Purchase
So I bought the wrong set, this was a little too small for me. I have a 96’ F-350 4x4, and overall everything in the set was too small to fully work.

I was stuck to make it work though so I used this to get the ball joints moving then finished by smashing them out with a hammer. Installation was about the same.

That is all my fault, but I can comment on the tool itself. The threads in the C clamp and on the forcing screw already look pretty worn out after just 4 ball joints out and in. I did grease the threads. I don’t know how long it will last. Also the receiving cups seem slightly weak as one of mine is already deformed.

I am quite hard on stuff though so maybe it’s just me. Probably would be great for really small ball joints

Read more

Helpful

�鶹�� Customer
Decent ball joints press but may not work for all vehicles.
Reviewed in Canada on March 19, 2020
Verified Purchase
Works well, I used this on a 94 mustangs ball joint and had all the fittings needed. It’s fairly easy to use could have used a grease fitting to help with longevity but was the right price.

Read more

Helpful

Sorry, there was a problem.